Metal Punch Press Dies
Designed for High-Speed Blanking Machines
Do you need Metal Punch Press Dies? We specialize in making dies for punch and blanking machines, which combine feeding, stamping, and cutting. This is different from a normal press, and our designers are well-versed in how these machines operate. For your Metal Punch Press Dies, we strengthen the guiding system by using high-quality guide pins and bushings. This ensures that the punch and die remain perfectly aligned even at high speeds. We previously worked on a set of dies for a motor stator and rotor, where the client's old die had poor cut surfaces.
Smooth Cuts for Motor Parts
We adjusted the cutting clearance for the Metal Punch Press Dies, and used slow wire cutting to create the cutting edge. Our slow wire achieves a parallel and straightness precision of 0.001mm. The new die produced a very clean cut with minimal burrs. We also carefully select materials, controlling hardness within the range of 30 to 90 HR based on your stamped material. Additionally, we design a quick-change punch structure, allowing you to replace a worn-out punch in just a few minutes.
Stable Production for Your Line
This solution has already been implemented on many production lines with highly stable results. A common question we receive is about the EDM finish. For Metal Punch Press Dies, we offer mirror EDM finishing at RA0.2, which aids in material flow. With 13 years of factory experience, we can help you develop new dies tailored to your needs. Simply send us your product drawing, and we will assist in designing the die. We offer EXW, FOB, and DDP shipping terms.
Specification Table
|
Item |
Parameter |
Item |
Parameter |
|
Whole Mold Precision |
0.005mm |
EDM Precision Tolerance |
0.003mm |
|
Injection Molding Precision |
0.02mm |
EDM Corner Precision |
0.01mm |
|
Mold Life |
2 Million Strokes |
Mirror EDM Finish |
RA0.2 |
|
Material Hardness Range |
30~90 HR |
Slow Wire Cutting Precision |
0.005mm |
|
Surface Grinding Precision |
0.001mm |
Slow Wire Parallel/Straightness |
0.001mm |
|
Grinding Precision |
0.002mm |
CNC Concentricity |
0.002mm |